1 jst 5 this is a 2.5mm pitch insulation displacement connector that is soldered directly onto printed circuit boards, with a mounting height of 7.1mm and with a width of 4.1mm. the db connectors can be used by themselves or in combination with nr or hr connectors. features ?compact and low profile this is a low profile connector with a mounting height of 7.1mm and a width of 4.1mm. ?twin u-slot insulation displacement section the insulation displacement section connected to the wire consists of two tin-plated slots (twin u-slot) for superb reliability. ?locking solder tail the contact? compliant solder tail has two locking positions, both of which ensure stable connection once inserted into a printed circuit board. this makes insertion into printed circuit boards easy and reliable. ?strain relief the strain relief feature prevents stress due to vibration, impact or bending from effecting the insulation displacement connection. this is accomplished by holding the outside of the wire with the insulation gripping device on the housing. to ensure circuit integrity against vibration and undue tension, ample clearance is provided between the insulation displacement connection and the strain relief. ?interchangeability the db connector has the same board layout and hole size as crimp style sbn and scn connectors. specifications ?current rating: 2a ac, dc (awg #24) ?voltage rating: 250v ac, dc ?temperature range: -25?c to +85?c (including temperature rise in applying electrical current) ?insulation resistance: 1,000m ? min. ?withstanding voltage: 1,500v ac/minute ?applicable wire: ul1007 (contact jst for details regarding other ul wires.) awg #28, #26, #24 conductor/7 strands, tin-coated insulation o.d./1.0 to 1.5mm ?applicable pc board thickness: 1.6mm * compliant with rohs. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 db connector board-in insulation displacement connectors 2.5mm pitch idc
2 db connector connector 2.0 4.1 b a 2.5 jst 1.7 6.4 7.1 3.65 cir- cuits model no. awg #28 (green) awg #26 (natural/white) awg #24 (black) dimensions (mm) ab q'ty / box material and finish 2 3 4 5 6 7 8 9 10 11 12 13 02db-8m 03db-8m 04db-8m 05db-8m 06db-8m 07db-8m 08db-8m 09db-8m 10db-8m 11db-8m 12db-8m 13db-8m 02db-6s 03db-6s 04db-6s 05db-6s 06db-6s 07db-6s 08db-6s 09db-6s 10db-6s 11db-6s 12db-6s 13db-6s 02db-4k 03DB-4K 04db-4k 05db-4k 06db-4k 07db-4k 08db-4k 09db-4k 10db-4k 11db-4k 12db-4k 13db-4k 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 1,000 1,000 1,000 500 500 500 500 500 500 500 250 250 contact: phosphor bronze, nickel-undercoated, tin-plated housing: pa 66, ul94v-0 pc board layout (viewed from soldering side) and assembly layout 7.1 4.1 2.1min. 2.5 0.05 2.5min. 1.00.05 note: 1. tolerances are non-cumulative: ?.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guideline. contact jst for details. * pulling or otherwise putting a strain on the harness attached to the connector before the solder has completely cooled can dislodge the connector or cause its misalignment. * do not reuse connectors that were previously soldered to and then removed from a pc board. rohs compliance this product displays (lf) on a label. as the color identification, the following alphabet shall be put in the underlined part. for availability, delivery and minimum order quantity, contact jst. ex. 02db-4k - s?atural (white) [standard color for awg#26] k?lack [standard color for awg#24] m?reen [standard color for awg#28]
|
